2.
Specifications
Digital to analog conversion type Proprietary Discrete DAC
Pure R2R ladder - FPGA (Field Programmable Gate Arrays) based without
digital filter
Supported Native Sample Rates
AQlink / I2S serial bus - USB PC Audio : 44.1kHz to 384kHz PCM up to 24
bits
DSD64, DSD128
Supports DSD via DoP on all inputs
DAC architecture
Multibit sign magnitude R2R ladder (upgradable)
Asynchronous USB (High Speed)
USB Audio Class 2 with Type B connector
Digital Receiver
PLL (phase locked loop) technology 128 or 256 FS selectable
AQlink (I2S bus)
LVCMOS level
Oversampling factor
1x
Analog Conversion method
Pure R2R ladder - FPGA (Field Programmable Gate Arrays) based digital
decoding without digital filter
Digital inputs
- RJ45 AQlink (I2S serial bus) - 24 bit / 384 KHz
- BNC coax (S/PDIF) 75 ohm - 24 bit / 192 KHz
- USB port - 24bit / 384 kHz PCM - DSD64, DSD128
AQ-i modular input:
- AES/EBU balanced 110 ohm - 24 bit / 192 KHz (cod. D111)
- RCA coax (S/PDIF) 75 ohm - 24 bit / 192 KHz(cod. D113)
- AT&T (ST Fiber) - 24 bit / 192 KHz(cod. D112)
- Optical TOSLINK - 24 bit / 96 KHz (cod. D114)
Analogue Outputs
UNBAL 2 RCA Output 2.4 V RMS
BALANCED (asymmetrical output) 2 XLR Output : 4.8V RMS
Output Impedance
100 Ω RCA - 600 Ω XLR
Load Impedance
10 k Ω (min.) RCA - 600 Ω XLR
Frequency Response
20Hz to 22kHz +0.5dB/-0.5dB
THD + N
<0.1% 1KHz -20dB
Front Panel
Power, input selector, Phase Invert switch
Power Consumption
100-115V / 220-240V; 50 or 60Hz - 58VA
Dimensions
( W x D x H ) 450 x 310 x 100 mm
Weight
7 kg
Front finish
Satin Alu Silver or Satin Black
Case finish
Grey Nextel powder coated
