background image

USER MANUAL FOR AC-2

6

 POOL FILTER 

9

SAFETY 

1. ROUTINE

z

The device is limited to be used in tap water.

z

The filter is limited to be used for swimming pool water treatment and prohibited to be used for
other water treatment.

z

Periodical checking is necessary.

z

Please contact the supplier before you refit any part of the device. Only parts from the
manufacturer will ensure smooth running of the filter. Any foreign parts installed without approval
will cancel the manufacturer’s warranty .

z

When working, do not insert & pull out, connect or do other operation.

z

It is better to ask authorization personnel for maintenance and repair. Please read this manual
before maintenance and repair.

z

Please contact the manufacturer or the nearest dealer when there is incorrect operation or damage.

2.

NOTES FOR INSTALLATION AND ASSEMBLY

z

Before connecting the cable to device, please check if it is installed and connected correct.

z

Very important, do not let device and electrical parts get wet when the electricity power is on.

3. NOTES FOR STARTUP

z

Check the cable, operation location and others before start-up.

z

Do not start filtration function if the water line is not high enough.

4. NOTES FOR MAINTENANCE

z

Make sure the power is OFF when opening the technical house cover.

5. NOTES FOR USAGE

z

Do not stand on the filter cover.

z

Do not let children open the technical house (optional locking device)

z

Do not use device as springboard

Summary of Contents for AC-26










Reviews: