Aqua Systems Eradicator II AIF, Maintenance Manual

Page: 15 / 40

© 2014 New Aqua LLC dba Aqua Systems • 7785 East US Hwy 36 • Avon, IN 46123
15
Eradicator II AIF Systems
Installation, Operation,and
Maintenance Manual
Programming
User Displays/Settings:
Regeneration Mode:
1. Typically a system is set to regenerate at a time of low water usage. An example of a time with low water usage
is when a household is asleep. If there is a demand for water when the system is regenerating, untreated water
will be used.
2. When the system begins to regenerate, the display will change to include inform-
ation about the step of the regeneration process and the time remaining for that
step to be completed. The system runs through the steps automatically and will
reset itself to provide treated water when the regeneration has been completed.
3. Sometimes there is a need to regenerate the system, sooner than the system calls for it, usually referred to as
manual regeneration. There may be a period of heavy water usage because of guests or a heavy laundry day.
4. To initiate a manual regeneration immediately, press and hold the “REGEN” button for three seconds until the
system starts the regen. To initiate a regeneration at the normal scheculed time, push and release the “REGEN”
button. The display will alternate from the current screen to “REGEN TODAY”.
User 1
Time of Day Screen
User 2
Capacity Remaining Screen “/” Will appear to rotate whenever
flow is detected.
User screens will continuously scroll, switch-
ing views every 10 seconds. If the screens
are manually scrolled by pushing the “NEXT”
button, the screen will remain constant for 5
minutes then continue to scroll.
* Error and Alert screens will take precedence
over the normal scrolling.
User 3
Current Flow Rate Screen - Displays
Water Flow through System
Return to User 1
User 4
Contact Screen - Displays Dealer
Name and Phone Number (If
programmed)
Blue Screen = Softener
Green Screen = Filter
Red Screen = Error or Alert