36
Reminder Messages
General maintenance helps.
Reminder Messages can be suppressed by using the Preferences Menu. See Page 18.
Reminder Messages can be chosen individually by the Manufacturer. They may be disabled entirely,
or there may be a limited number of reminders on a specific model. The frequency of each reminder
(i.e. 7 days) can be specified by the Manufacturer.
Check the pH
May appear on a regular schedule, i.e. every 7 days.
Check pH with a test kit and adjust pH with the appropriate chemicals.
Check the sanitizer
May appear on a regular schedule, i.e. every 7 days.
Check sanitizer level and other water chemistry with a test kit and adjust with the appropriate chemicals.
Clean the filter
May appear on a regular schedule, i.e. every 30 days.
Clean the filter media as instructed by the manufacturer. See HOLD on page 17.
Test the GFCI
(or RCD)
May appear on a regular schedule, i.e. every 30 days.
The GFCI or RCD is an important safety device and must be tested on a regular basis to verify its
reliability.
Every user should be trained to safely test the GFCI or RCD associated with the hot tub installation.
A GFCI or RCD will have a TEST and RESET button on it that allows a user to verify proper function.
Change the water
May appear on a regular schedule, i.e. every 90 days.
Change the water in the spa on regular basis to maintain proper chemical balance and sanitary
conditions.
Additional messages may appear on specific systems.
Reminder messages can be reset from the panel.
Messages that
can
be reset will appear with a
“right arrow” at the end of the
message. Press the message text to reset the message.
Clean the filter
