24
The Meaning of Filter Cycles
1.
The heating pump always runs during the filter cycle*
2.
In Rest Mode, heating only occurs during the filter cycle
3.
Purges happen at the start of each filter cycle
* For example, if your spa is set up for 24/hour circulation except for
shutting
off when the water temperature is 3˚F/1.3˚C above the set
temperature, that shut off does not occur during filter cycles.
Additional Settings
Light Cycle Option
If Light Cycle does not appear in the Settings Menu, the Light Timer feature is not enabled by the
manufacturer.
When available, the Light Timer is OFF by default.
The settings can be edited the same way that Filter Cycles are edited (see page 13).
Invert Panel
Selecting Invert Panel will flip the display and the buttons so the panel can be easily operated from inside
or outside the hot tub.
Auxiliary Panel(s)
Specific Buttons for Specific Devices
If the spa has an Auxiliary Panel(s) installed, pressing buttons on that panel will activate the device
indicated for that button.
These dedicated buttons will operate just like the Spa Screen buttons (see page 5) and the equipment
will behave in the same manner with each button press.
Light Cycle
Enabled No
Starts at 12:00 AM
Runs 0 HR 0 Min
Ends at 12:00 AM
