32
General Messages
Most messages and alerts will appear at the bottom of the normally used screens.
Several alerts and messages may be displayed in a sequence.
– – –°F
– – –°C
Water Temperature is Unknown
After the pump has been running for 1 minute, the temperature will be displayed.
Possible freezing condition
A potential freeze condition has been detected, or the Aux Freeze Switch has closed. All water devices
are activated. In some cases, pumps may turn on and off and the heater may operate during Freeze
Protection. This is an operational message, not an error indication.
The water is too hot
–
M029*
The system has detected a spa water temp of 110°F (43.3°C) or more, and spa functions are disabled.
System will auto reset when the spa water temp is below 108°F (42.2°C). Check for extended pump
operation or high ambient temp.
The water level is too low
This message can only appear on a system that uses a water level sensor. It appears whenever the water level
gets too low (or the water level sensor is disconnected), and automatically disappears when the water level is
adequate. Pumps and the heater turn OFF when this message appears.
