background image

15

WARRANTY INFORMATION (Cont.)

3.  The cleaner is designed to function in a properly designed, constructed and maintained pool. This  

warranty does not extend in the circumstances where the pool’s design, construction or maintenance is 

defective or sub-standard.

4.  Deterioration, discoloration or brittleness of pool plaster and vinyl liners can be caused by age, improper 

pool chemistry, improper installation, or other factors. Customer hereby disclaims any and all claims, and 

releases the manufacturer from any and all claims for damages to any pool plaster or vinyl liner in the 

customer’s pool by reason of the use and / or operation of the cleaner. Customer represents and agrees 

that claims which it may assert against manufacturer shall be limited to those which may be asserted under 

the foregoing limited warranty.

5.  The cleaner is designed for the use on above-ground and In-ground residential pools only and its warranty 

is limited to this use. If cleaner is used in any other application, customer understands that this is a misuse of 

the product and will void all warranty of the cleaner. Further, customer hereby releases manufacturer from 

Nany and all claims stemming from the misuse of the cleaner.

6.  Under no circumstances shall manufacturer be liable for any loss or damage, whether direct, consequential 

or incidental, arising out of the use or inability to use the cleaner in customer’s pool.

7.  The limited warranty does not apply to injury, loss, damage, defect or malfunction of the cleaner or failure 

to function resulting from any failure to operate or maintain the cleaner in accordance with the directions 

contained in the instruction and operation manual or operating instructions provided by Aqua Products; 

or any injury, loss, damage, defect or malfunction or failure to function resulting from any accident, acts of 

God, alterations in the cleaner by anyone other the manufacturer including but not limited to such damages 

or injuries to parts resulting from improper installation or damage to pump parts resulting from running 

the pump dry (e.g., interruption in or inadequate supply of water to pump parts due to loss of prime or 

obstruction in line or otherwise); or damage, defect or malfunction resulting from defects in, failure or 

malfunction of, or negligence, abuse, or misuse with respect to equipment other than the cleaner; or any 

damage or loss of any nature what so ever and personal injury caused due to the presence of a foreign 

object in or about the pool.

8.  The limited warranty is valid and enforceable only on cleaners made by Aqua Products.
9.  This limited warranty is applicable only if the cleaner is purchased from a Aqua Product dealer.
10.  This warranty shall apply only to customer as an original purchaser of the cleaner from a Aqua Product 

dealer and shall not apply to any subsequent purchaser, assignee or other recipients of the cleaner from 

customer.

11.  No dealer, distributor or other similar person has any authority to make any warranties or representations 

concerning SPLASHER, or to extend this warranty beyond the express terms contained herein. Manufacturer 

assumes no responsibility for any warranties beyond the express terms contained in this warranty. 

12.  This limited warranty does not apply unless the Registration Card is signed, completed and returned 

within fourteen (14) days from the date of purchase. The manufacturer reserves the right to dispose of 

Registration Card once it is received.

13.  These warranties set forth herein are in lieu of any other warranties, expressed or implied, including the 

warranties of merchantability or fitness. Any such implied warranty imposed by state consumer law is 

limited in duration to one (1) year from the date of purchase.

14.  Customer represents and agrees that any claims with it may assert against the manufacturer shall be 

limited to those which may be asserted under the foregoing warranty.

Summary of Contents for Splasher





















Reviews: