background image

14

WARRANTY INFORMATION

SPLASHER 1 YEAR WARRANTY

(Attach sales receipt as proof of purchase date)

Your new SPLASHER was carefully checked before shipment. Upon unpacking, if any parts are missing or 

found to be defective notify Aqua Products immediately. Please consult owner’s manual for instructions 

on the installation and operation of this product. The Manufacturer warrants this SPLASHER to be free 

from defects in materials and workmanship for a period of one (1) year from proven date of purchase.  

Warranty exclusions

This warranty excludes the following: 
1.  Discoloration of the SPLASHER is caused by reaction to chemicals used in the pool water. Discoloration 

does not affect the operational ability of the SPLASHER. Therefore this warranty does not cover the 

replacement of discolored parts.

2.  Damage to, or malfunction of the unit resulting from excess chlorinating or improper water chemistry 

balance.

3.  Replacement of parts that fail or become defective as a result of improper installation, negligence, 

misuse, abuse or tampering by unauthorized repair personnel.

4.  Age, pool water imbalance and improper installation can cause pool liners to become brittle or unduly 

wrinkled. Corrosion of the supporting walls and/or irregularities in the pool base may also cause liner 

failure. The use of this product in such an environment is at the pool owner’s risk. Therefore the pool 

owner hereby releases any and all claims for damage where these conditions exist.

5.  Abrasion to the hose or damage caused by misuse or improper installation.
6.  All wearing parts must be regularly checked and replaced when worn. These include the foot pad, 

disc and bumper wheel.

7.  All newly installed pools must be properly cured before a cleaner is used. Use of a cleaner can only 

take place once the pool has cured.

8.  A cleaner must be properly installed and its performance must be monitored to ensure no undue wear 

and tear on product or pool occurs.

9.  The Diaphragm is a wearing part which could be damaged by debris picked up from the pool floor, 

 under these circumstances it will NOT be covered by the manufacturer’s warranty. 

Note:  Most problems are caused by poor installation, poor water chemistry, wear and tear, twigs or 

debris blocking the Diaphragm or low suction from a dirty filter. No claim under this warranty will be 

recognized unless the attached registration card is completed and returned within fourteen (14) days of 

the day of purchase.  Only the original purchaser may claim under his warranty and SALES RECEIPT   or 

PROOF OF PURCHASE DATE is required. Purchaser’s claims shall be limited to manufacturing defects 

only. 

Warranty Terms and Conditions

Conditions & exclusions 
1.  This warranty is for the replacement of defective parts only and does not cover labor charges 

including, but not limited to, charges incurred for installation of replacement parts or additional fees 

that may be imposed by the dealer or servicing agent.

2.  This warranty against wear does not include replacement of parts that become discolored due to 

exposure to sunlight or chemicals, or parts which, even if worn, do not affect performance of the 

cleaner. Nicks, scratches, fading, discoloration, etc. are cosmetic conditions that do not necessarily 

affect mechanical performance. Both manufacturer and dealer reserve the right to deny any and 

all warranty claims made for worn parts if manufacturer/dealer determines that the wear does not 

negatively affect mechanical performance of the cleaner.

Summary of Contents for Splasher





















Reviews: