background image

4

*Sold separately

For extended life and ease of assembly 

For extended life and ease of assembly 

and disassembly during maintenance, it is 

and disassembly during maintenance, it is 

recommended that o-rings are lubricated with an 

recommended that o-rings are lubricated with an 

aquarium safe o-ring lubricant such as AquaLube*. Lubricating the 

aquarium safe o-ring lubricant such as AquaLube*. Lubricating the 

o-rings will also minimise the chance of parts seizing leading to accidental 

o-rings will also minimise the chance of parts seizing leading to accidental 

breakages during maintenance.

breakages during maintenance.

To remove the o-ring, 

To remove the o-ring, 

use a plastic card, such 

use a plastic card, such 

as a credit card to gently 

as a credit card to gently 

lever the o-ring up and 

lever the o-ring up and 

over the lip of its seat. 

over the lip of its seat. 

Then roll it off the part.

Then roll it off the part.

Cleaning and Lubricating of O-Rings

Cleaning and Lubricating of O-Rings

Rinse in fresh water to 

Rinse in fresh water to 

remove any particles 

remove any particles 

attached. Dry the o-ring.

attached. Dry the o-ring.

Put a small amount of 

Put a small amount of 

lubricant* and smear it 

lubricant* and smear it 

over the o-ring so that it 

over the o-ring so that it 

is covered by a thin film.

is covered by a thin film.

CORRECT DISPOSAL OF THIS PRODUCT

CORRECT DISPOSAL OF THIS PRODUCT

Disposal of used Electrical & Electronic Equipment (Applicable in the European Union 

and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that the product must not be disposed of 

with normal household waste. Instead, it is your responsibility to dispose of your waste equipment by arranging 

to return it to a designated collection point for the recycling of waste electrical and electronic equipment. By 

separating and recycling your waste equipment at the time of disposal you will help to conserve natural resources 

and ensure that the equipment is recycled in a manner that protects human health and the environment. 

For more information about recycling this product, please contact your local city office, your household waste 

disposal service or the shop where you have purchased the product.

Summary of Contents for PHX 100













Reviews: