Aqua One PHX 100, Quick Start Manual

Page: 8 / 12

8
Daily Daily
Maintenance
Ensure the powerhead is mounted
correctly, and that there is adequate
water flow.
Check all pipes and fittings are
attached and clear of debris.
Unplug all equipment before beginning work on any Unplug all equipment before beginning work on any
part of the aquarium. Ensure that your hands and all part of the aquarium. Ensure that your hands and all
power cables are dry before plugging in equipment and power cables are dry before plugging in equipment and
turning the power on. turning the power on.
If the powerhead wont stay in place, the suction If the powerhead wont stay in place, the suction
cups may have become stiff with use, soak cups may have become stiff with use, soak
suction cups in warm tap water (not boiling) to suction cups in warm tap water (not boiling) to
soften them for 10 minutes. If they still will not soften them for 10 minutes. If they still will not
hold then they should be replaced. hold then they should be replaced.
Suction Cups Suction Cups
If you are having trouble disconnecting If you are having trouble disconnecting
the suction cups from the glass, do not the suction cups from the glass, do not
pull them away from the glass as you may pull them away from the glass as you may
damage the cups or the bracket. You can release damage the cups or the bracket. You can release
them by pushing on opposite sides of each sucton them by pushing on opposite sides of each sucton
cup to break the seal. cup to break the seal.