7
In case the reactor is not filled completely the filter materials in the reactor can be whirled up. In some cases,
the so called fluidized bed method is required, but with filter media such as phosphate removers it may heavily
cloud the water. This kind of filter media should only be moved slightly or only used in a fixed bed.
The divider included in versions M and L is used to divide the reactor housing. It can be attached to the bottom
or top of the respective cap. When attaching it to the lower part, pull it out so far that a sufficiently large gap is
created. The use of a funnel at the top is recommended for filling through one of the upper outlet openings.
In order to prevent cloudiness caused by some filter materials, such as activated carbon or phosphate remover,
simply rinse them with water prior to use with the multi reactors.
The pump needs to be cleaned as required. To do this, open the pump and clean the individual components.
Note:
Low water level in the filter sump may lead to dry running and thereby overheating of the pump. If the
pump is sucking in air, it could result in salt or calcium deposits inside the impeller housing which results in
pump failure.
3. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material
and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not limited by
this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear ie: impellers or
drive wheels etc. The original invoice or receipt is required as proof of purchase. During the warranty period,
we will repair the product for free by installing new or renewed parts. This warranty only covers material and
processing faults that occur when used as intended. It does not apply to damage caused by transport, improper
handling, incorrect installation, negligence, interference or repairs made by unauthorized persons.
In case of
a fault with the unit during or after the warranty period, please contact your dealer. All further steps
are clarified between the dealer and AB Aqua Medic. All complaints and returns that are not sent to
us via specialist dealers cannot be processed.
AB Aqua Medic is not liable for consequential damages
resulting from the use of any of our products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 11/2020/v4
