12
3. Complete the hull inflation
At last, complete the hull inflation. Same as above, firstly add inflation to the air chamber in the bow.
Then the air chambers on the both sides of the hull, at last the inflatable keel. The steps are as
following pictures.
4. Install the centre thwart/dagger bench
Buckle the centre thwart into the pumps on both sides of the hull. The bottom of the centre
thwart is with standard inserting board and the hull is with inserting port.
Insert them into the hull and fix them.
Install the waterproof bag of the centre thwart on the fixing board. Apply magic sticker to stick
around the inserting port to finish the installation.
A
B
C
SAIL RIG SET UP
1. Spread out the canvas of the Pioneer sail rig on a clean surface.
2. Mast installation: The mast should be installed by inserting in following order: 1
– 2 – 3 – 4.
