Aqua Lung Rapid Diver User Manual Download Page 6

6

Rapid Diver™ User's Manual

WARNING

Although this manual provides some basic guidelines 

for certain buoyancy control techniques, it is not a substitute for 

training from a professional diving instructor. Failure to weight 

yourself properly may create a hazardous condition that could 

lead to serious injury or death. If you are unsure how to weight 

yourself in order to achieve optimum buoyancy underwater and 

on the surface, do not dive until you have obtained the necessary 

instruction from your diving instructor or an Authorized Aqua 

Lung Dealer or Distributor.

WARNING:

 

In an emergency such as an out of air situation or 

uncontrolled descent, it is important to remove and jettison 

weight immediately. DO NOT depend solely on using your BC 

power inflator to lift you to the surface.

WARNING:

 

In the event of an uncontrolled, rapid ascent, it is 

important to immediately begin venting air from the BC. Continue 

venting air to slow your ascent rate if neutral buoyancy cannot 

be reestablished.

If you have any questions regarding your Buoyancy Compensator or 

these instructions, please contact your Authorized Aqua Lung Dealer 

or Distributor. Distributor information is available on the Aqua Lung 

website at: www.aqualung.com/militaryandprofessional

    

NOTE: CE Conformity - This BC conforms to EN 1809: 2014.

It was controlled by the l’Institut National de Plongée Professionnelle, 

organisme notifié n°0078, entrée n°3 port de la pointe rouge 13008 

Marseille -France.

Summary of Contents for Rapid Diver

































Reviews: