12
Rapid Diver™ User's Manual
6.
The procedure for securing the cylinder band to the cylinder is covered in
Securing the Band to the Cylinder
section of this manual.
7.
Assemble the regulator first stage to the cylinder valve
(See manual provided
with regulator for attachment instructions)
.
8.
Connect the MP inflator hose and secure it in place using the hook and
loop attachment
(Fig. 5f)
. The procedure for connecting the MP inflator hose
is covered in the
Inflation Methods
section of this manual.
9. Slowly
pressurize the system while carefully listening for leaks. If any leaks
are detected, do not dive with your Rapid Diver System until the source of the
leak has been corrected.
5.
Slide the cylinder band over the cylinder
so the soft pack is at the desired position in
relation to the cylinder valve. Make sure the
cylinder valve air outlet is facing the back of
the soft pack
(Fig. 9)
.
4.
Open the cylinder band buckles and loosen the bands.
3.
The procedure for weaving the cylinder band through the cam buckle is covered
in
Threading the Cam-Buckle
section of this manual.
Fig. 9
NOTE:
When using the Rapid Diver System with a rear mount cylinder set up, a
standard SCUBA regulator configuration must be used.
Summary of Contents for Rapid Diver
Page 1: ...Rapid Diver System User s Manual Rev 2 18...
Page 30: ...30 Rapid Diver User s Manual NOTES...
Page 31: ...31 NOTES...
