Aqua Lung i450T, Owner'S Manual

Page: 29 / 86

Doc. 12-7834-r04 (2/16/16)
29
DIVE SURFACE MODE
© Aqua Lung International, Inc. (2015)
LOG
The log stores Information from the latest 24 DIVE and/or GAUGE mode dives for viewing.
• If no dives are recorded, the message NO DIVES YET will be displayed.
• After exceeding 24 dives, the most recent dive is stored while the oldest is deleted.
• Dives are numbered from 1 to 24 starting each time a dive is activated in either Dive (or Gauge) mode. After
the post dive 24 hour period has elapsed and the unit shuts off, the first dive of the next activation period will be
recorded as dive #1.
• I n the event that dive time (DIVE MIN) exceeds 999 min, the data at the 999 interval is recorded in the Log upon
surfacing of the unit.
• The message GAUGE or VIOL (violation) will display, above the dive start time, if applicable on the Log Data 1.
NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes
full. If you do not remember to log or download your dives, they will be lost when the memory over-
writes. See the PC Download section of this manual for instructions on downloading dives.
LOG DATA 1
SELECT
ADV
.
LIGHT
MODE
to Log Data 2
step forward
through log
records
step backward
through log
records
date of dive
dive #
dive
start time
SELECT
ADV
.
LIGHT
MODE
LOG DATA 2
to Log Data 3
max tissue loading,
blank if GAUGE dive
max
ascent rate
hr:min
max depth
elapsed dive time (min)
SELECT
ADV
.
LIGHT
MODE
LOG DATA 3
SELECT
ADV
.
LIGHT
MODE
LOG DATA 4
recorded elevation of
dive location,
SEA (or EL 2 - EL7)
lowest
temperature
highest PO
2
reached during
the dive
% O
2
Saturation
at end of dive, - - if the
dive entered
Violation Gauge Mode
gas mix
FO
2
(% O
2
)
to Log Data 4
or exit
to exit
start and end
pressure, blank
if no TMT
NOTE: Log Data 4 only displays for nitrox dives; it is bypassed if the dive was an air dive.