HEAD LINER
NOTE:
The head liner may be washed by hand or machine. Recommended Hook and Loop
Tape: Industrial strength, sticky back tape, waterproof.
Step 1: Cut hook and loop tape
into 4 pieces, 2 in x 1 in each.
Step 2: Round off corners on 2
pieces of hook and loop tape.
Step 3: Stick hook and loop tabs on
front sides of the helmet shell (1).
Step 4: Stick hook and loop tabs on
both rear sides of the helmet shell (1).
Step 5: Head liner.
Step 6: Line up head liner as shown.
Step 7: Place left speaker (38) in
left pocket of head liner.
Step 8: Place right speaker (28)
in right pocket of head liner.
Step 9: Head liner installed into
helmet shell (1). (No oral-nasal
mask fitted).
CAUTION: The head liner and oral-nasal mask must be used at all times when diving.
The head liner ensures that the oral-nasal mask maintains a good fit on the diver’s
face and reduces dead space in the helmet, this helps to prevent CO2 build-up.
NOTE:
The head liner should be fitted carefully into the helmet shell so that visible parts of
the helmet shell (i.e. bare spots) are minimized.
36
Aqua Lung G3000SS Diving Helmet Operations & Maintenance Manual
