when installing the UltraSieve or when you change pumps.
Procedure
and fasten the bolts again. You’re done.
Maintenance
It is recommended to monitor the UltraSieve every day. Maintenance is very easy because of the waste outlet. In fact maintenance is about two operations: 1) To
1) Removing the waste that is on the surface of the sieve is very easy by opening the waste outlet and to rinse the waste away with a normal hose pipe. Another
position already because of the pump speed you can pull up the dam for a short while and push it back downwards again.
way of cleaning you have to place the sieve in an upright position or take the sieve out of the unit. After a certain period of time the sieve can get “fat” and this will
the sieve very thorough with alcohol before using it.
Position 2
(Standard) This level gives the weir its
minimum length, suitable for pump speeds to ± 25m³/h.
The minimum length of the weir is to have a high water
level under the screen to prevent a high speed pump
from priming air.
Position 1
This level gives the weir its maximum
length, suitable for pump speeds to ± 10m³/h. The
maximum length of the weir prevents the water
level underneath the sieve from going too high for
low speed pumps.
PROFESSIONAL
POND
PRODUCTS
AquaForte is a trademark of Sibo BV Veghel
www.aqua-forte.nl copyright Sibo BV version 1.01 2015
POSITION 1
POSITION 2
DIMENSIONS
MATERIAL
64 x 37
x 75 cm 64 x 54 x 75 cm
110 mm
Polypropylene
2 x 110 mm 3 x 110 mm
90mm
Polypropylene
90/110mm
450
x 345
mm
300 micron
450 x 500 mm
± 25m³/h ± 35m³/h
± 23 kg ± 30 kg
LOW
LOW “L”
LOW
LOW “L”
HOUSING
INLET
OUTLET (1x)
WASTE OUTLET
SIEVE
CAPACITY
WEIGHT
1 cm thick Polypropylene
PVC Slide Valve
Stainless Steel 304
EXTRA INFO
Supplied with PVC ring 110mm
Supplied with
90/63mm flex. fitting
0
5
7
640
370 / 545
2
9
2
0
0
5
65
9
0
1
1
0
95
95
525
750
500
740
545
167,5
167,5
95
95
LOW
LOW “L”
