background image

“A” SERIES & “LEA” SERIES PUMPS LIMITED WARRANTY 

AQUA-FLO, LLC 

WARRANTS TO:  

 

 
the original retail purchaser only, that the products Aqua-Flo manufactures are 
free from defects in material and/or workmanship for a period of five years from 
date of purchase, not to exceed six years from date of manufacture, (pump seals 
warranty for 30 days).  If within the first two years from date of manufacture, any 
such product proves to be defective, it shall be repaired or replaced at AQUA-
FLO’S option as follows: 
 

The original retail purchaser shall first contact the installing dealer, as soon as 

possible after discovery of the defect, but in no event later that the expiration 

date of this warranty.  Or upon notification, 

AQUA-FLO, LLC

 

Customer Service Department 

P.O. Box 2526, Chino, CA  91708 

will advise the consumer of the address to which the defective item may be 
shipped, together with  the model number, serial number and date of purchase of 
item claimed to be defective.  The consumer must pay for all shipping charges. 
 
If within the years three through five any such products shall prove defective, the 
original retail purchaser shall be entitled to purchase replacement equipment or 
components at the following percentage off the current published list price: 

Third year          60% 

Fourth year       40% 

Fifth year           20% 

1. This warranty shall not apply to any failures resulting from negligence, abuse, 

misuse, misapplication, improper installation, alteration or modification, 
chemical corrosion, or improper maintenance. 

 
2. Any items manufactured by other companies and used by AQUA-FLO  in its 

products may carry warranties by the original manufacturers. 

 
3. AQUA-FLO is not liable for incidental or consequential damages, loss of time, 

inconvenience, incidental expenses, labor or material charges in connection 
with removal or replacement of the equipment. 

 
AQUA-FLO is not responsible for any implied warranties or representations by 
others, and the foregoing warranty is exclusive and in lieu of all warranties 
provided herein. 
 
Some states do not allow the exclusion or limitation of incidental or consequential 
damages, so the above limitation or exclusion may not apply to you. 
 
This warranty gives you specific legal rights, and you may also have other rights 
which vary from state to state. 
 

 

Summary of Contents for "A" Series & "LEA" Series Pumps A Series









Reviews: