5
PRO POOL LIFT - ASSEMBLY INSTRUCTIONS
1.
Attach Seat belt to the seat as shown.
2.
Plug the handset cable into the large handset socket
on the bottom of the control box. Be sure you press
the cord end firmly into the socket until you are sure
it is all of the way into the socket. Failure to fully
push the remote cord into the socket may result in
faulty or interrupted operation.
3. Before installing the battery, place it on the charging
unit and let it charge for 24 hours. Make sure the
orange “charge” light illuminates when the battery is
being charged.
4.
Remove the fully-charged battery from the charger and install it on top of the Control
Box. The battery will line up square with the control box, and will ‘click’ when it
locks in place properly. The lift will only operate when the battery is mounted
properly.
WHEN NOT IN USE STORE THE BATTERY ON THE CHARGER. DO NOT
LEAVE THE BATTERY ON THE LIFT WHEN NOT IN USE!
