background image

 

24 

Revised: 8/26/2016 

AQUA CREEK PRODUCTS, LLC LIMITED FIVE (5) YEAR WARRANTY: 

PRO POOL LIFT 

(ITEM #’s F-004PLB-AT1, F-004PLBNA-AT1, F-004PLB-R-AT1, F-004PLB-DD12-AT1, F-004PLB-23-AT1, F-004PLB-26-AT1) 

 

Aqua  Creek  Products,  LLC  (a.k.a.  Aqua  Creek)  warrants  to  the  original  end  user  purchaser  that  products  manufactured  by  Aqua  Creek, 
when properly installed in accordance with assembly and installation instructions, and properly used and maintained, shall be free from 
defects in material and workmanship for a period of 

five (5) years from the date of original purchase

, provided that Aqua Creek receives 

prompt notice in writing of any defect or failure and satisfactory proof thereof, with the following exception(s): 
 

Exceptions:

   

 

All electrical components, including the linear actuator shall have the following warranty period: 

o

 

Year 1-2: 100% Coverage 

o

 

Year 3: 60% Coverage (Customer is responsible for 40% of replacement cost) 

o

 

Year 4: 50% Coverage (Customer is responsible for 50% of replacement cost) 

o

 

Year 5: 40% Coverage (Customer is responsible for 60% of replacement cost) 

 

Hydraulic actuators and mesh slings shall have a warranty period of 

one (1) year from the date of original purchase

 

Powder coat finish scratches, scrapes, corrosion, or dents from customers normal use, negligence, or abuse 

 
This  warranty  specifically  excludes  reimbursement  for  labor  to  remove,  repair,  or  install  the  product  and  any  shipping  charges.    These 
warranties do not cover any damages due to accident, misuse, abuse, negligence or failure to properly maintain any products, or normal 
wear  and  tear  from  day  to  day  operations.  In  the  event  that  any  products  are  altered,  repaired,  or  improperly  installed  or  improperly 
used by anyone without the prior written approval by Aqua Creek, all warranties are void. IMPORTANT: AMOUNT OF WEIGHT PLACED ON 
LIFT SHALL NOT EXCEED THE RATED LIFTING CAPACITY FOR THE LIFT. NEVER OPERATE THE LIFT UNDER LOAD IN A DRY POOL (WITH NO 
WATER  IN  THE  POOL).    It  is  the  responsibility  of  the  lift  owner  to  verify  the  weight  of  the  patron  for  warranty  claim  purposes  and  to 
ensure that the lift is not overloaded.  Non-payment for product to Aqua Creek may void warranty. 
 
To initiate a warranty claim, the owner of an Aqua Creek product must provide the place of purchase, in writing, with a full description of 
the  product,  its  serial  number,  the  dates  of  purchase  and  installation,  and  the  exact  nature  of  the  defect.  Within  thirty  (30)  days  after 
receipt  of  a  written  warranty  claim  by  Aqua  Creek,  and  barring  any  unforeseen  delays,  the  place  of  purchase  will  be  notified  of  Aqua 
Creek’s decision regarding the claim. 
 
If  requested  by  Aqua  Creek,  any  defective  product  must  be  returned,  freight  prepaid  by  customer,  to  Aqua  Creek’s  designated  factory 
location or duly appointed distributor for inspection and/or repair. Aqua Creek will, at its option, repair or replace the failed or defective 
item,  and  deliver  the  repaired  product  or  replacement  to  the  customer.    All  freight  charges  are  the  responsibility  of  the  customer. 
Products returned to Aqua Creek for which Aqua Creek provides replacement under this limited warranty shall become the property of 
Aqua Creek.  A new warranty period shall 

NOT

  be established for the repaired or replaced products. Such products shall remain  under 

warranty only for the remainder of the original warranty period on the original products purchased.  
 
This  written  limited  warranty  constitutes  the  final,  complete  and  exclusive  statement  of  warranty  terms.  No  person  or  organization  is 
authorized to make any other specific or implied warranties or representations on behalf of Aqua Creek. 
 

THE  WARRANTIES  SET  FORTH  HEREIN  ARE  IN  LIEU  OF  ALL  OTHER  WARRANTIES,  EXPRESSED  OR  IMPLIED,  WHICH  ARE  HEREBY 
DISCLAIMED  AND  EXCLUDED,  INCLUDING  WITHOUT  LIMITATION  ANY  WARRANTY  OF  MERCHANTABILITY  OR  FITNESS  FOR  A 
PARTICULAR PURPOSE OR USE. 
 
THE SOLE AND EXCLUSIVE REMEDIES FOR BREACH OF ANY AND ALL WARRANTIES WITH RESPECT TO THE PRODUCTS SHALL BE LIMITED 
TO REPAIR OR REPLACEMENT AT AQUA CREEK’S DESIGNATED FACTORY LOCATION, OR DULY APPOINTED DISTRIBUTOR, OR IN PLACE 
AT AQUA CREEK’S OPTION. IN NO EVENT SHALL AQUA CREEK’S LIABILITY EXCEED THE ENTIRE AMOUNT PAID TO AQUA CREEK BY THE 
ORIGINAL PURCHASER FOR THE FAILED OR DEFECTIVE PRODUCT. 
 
IN NO EVENT SHALL AQUA CREEK PRODUCTS, LLC BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, INDIRECT, PUNITIVE OR 
EXEMPLARY DAMAGES OR LOST PROFITS FROM ANY BREACH OF THIS LIMITED WARRANTY OR OTHERWISE.  
 
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY FROM STATE TO 
STATE.  SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, SO 
SOME OF THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. 
 

Aqua Creek Products, LLC 

9889 Garrymore Lane 

Missoula, MT 59808 

Toll Free: (888) 687-3552 

Local/Intnl: (406) 549-0769 

www.aquacreek.com

 

Summary of Contents for F-004PLB-23-AT1

























Reviews: