VISION
11.
11.
11.
11. Alarm configuration
Alarm configuration
Alarm configuration
Alarm configuration
Select “Alarms” from the device list below the “VISION RGBpx” entry.
11.1.
11.1.
11.1.
11.1. Alarm reporting and alarm limits
Alarm reporting and alarm limits
Alarm reporting and alarm limits
Alarm reporting and alarm limits
If desired, activate alarm monitoring and set an appropriate alarm limit. If the cur-
rent reading is higher than the limit, an alarm can be raised.
While an alarm condition is detected, the device display will permanently show a
corresponding information screen. Additionally, the RGBpx illumination can be
configured to flash red.
On the alarm page within the aquasuite, all sources that currently raise an alarm
are highlighted with a red background color. Alarms that have been active at least
once since device start-up, but are not active presently, are highlighted with a yel-
low background color.
12.
12.
12.
12. Profiles
Profiles
Profiles
Profiles
Select “Profiles” from the device list below the “VISION RGBpx” entry.
The profile management can be used to to save four configurations as
profiles and activate them manually or automatically. Profile manage-
ment is a software feature of the aquasuite and requires a USB connection to the
VISION RGBpx module.
12.1.
12.1.
12.1.
12.1. Manual profile selection
Manual profile selection
Manual profile selection
Manual profile selection
Select the profile to be activated by clicking the corresponding button.
12.2.
12.2.
12.2.
12.2. Automatic profile selection
Automatic profile selection
Automatic profile selection
Automatic profile selection
Profiles can be activated automatically using the global profiles feature of the
aquasuite, see chapter 14.2. for details.
12.3.
12.3.
12.3.
12.3. Profile configuration
Profile configuration
Profile configuration
Profile configuration
All configuration changes are automatically stored in the currently active profile.
The current configuration can also be stored in any other profile by clicking the
corresponding button.
13.
13.
13.
13. System settings VISION RGBpx
System settings VISION RGBpx
System settings VISION RGBpx
System settings VISION RGBpx
Select “System” from the device list below the “VISION RGBpx” entry.
© 2020
Aqua Computer GmbH & Co. KG
- 15 -
Gelliehäuser Str. 1, 37130 Gleichen
computer
aqua
