AQmatic NX48 Service Manual Download Page 8

MASTER PROGRAMMING MODE FLOW 

CHART 

continued

REGENERATION DAY
OVERRIDE:OFF

Example:

Off 

(Default for Meter)

On

 (Default for Time Clock)

REGENERATION DAY
OVERRIDE:01 DAYS

Options: 

Off 

(Default for Meter)

 or On 

(Default for Time Clock)

Example:

1 Day

Range: 

1 to 99 Days

REGENERATION
TIME:

02:00AM

Example:

2:00 A.M. 

(Default)

Options: 

A.M. (U.S. Format)

HR (Metric Format)

NOTE: Regeneration time will not appear unless Regeneration Day Override 

is on.

CYCLE 1 00:10:00

Example: Backwash

00:10:00 

(Default 48-00 Stager & 51-09 Stager)

(Hours:Minutes:Seconds)

NOTE: Display will only appear on the master timer and it must be 

programmed as valve position #1. System size must be 3 or 4 to appear. Use 

the Shift button to move one space to the left.

NOTE: This screen will only display for System 14.

TRIP DELAY 2:

30 SECONDS

NOTE: Display will only appear on the master timer and it must be 

programmed as valve position #1. System size must be 3 or 4 to appear. Use 

the Shift button to move one space to the left.

NOTE: This screen will only display for System 14.

TRIP POINT 2:

gpm

NOTE: Display will only appear on the master timer and it must be 

programmed as valve position #1. System size must be 4 to appear. Use the 

Shift button to move one space to the left.

NOTE: This screen will only display for System 14.

TRIP POINT 3:

gpm

NOTE: Display will only appear on the master timer and it must be 

programmed as valve position #1. System size must be 4 to appear. Use the 

Shift button to move one space to the left.

NOTE: This screen will only display for System 14.

TRIP DELAY 3:

30 SECONDS

NOTE: Display will only appear on the master timer and it must be 

programmed as valve position #1. Use the Shift button to move one space 

to the left.

NOTE: This screen will only display for System 14.

CYCLE 2 01:00:00

Example: Brine

01:00:00 

(Default 48-00 Stager & 51-09 Stager)

(Hours:Minutes:Seconds)

Options:

 01:00:00 for Conditioner for the 48-00 Stager & 51-09 Stager 

(Default)

00:00:00 for Filter for the 48-00 Stager

CYCLE 3 00:10:00

Example: Fast Rinse

00:10:00 

(Default 48-00 Stager & 51-09 Stager)

(Hours:Minutes:Seconds)

CYCLE 4 OFF

Example:

Off 

(Default 48-00 Stager)

CYCLE 4 00:12:00

Example: Refill

00:12:00 

(Default 51-09 Stager)

(Hours:Minutes:Seconds)

CYCLE 5 OFF

Example:

2 to 998 gpm

1 to 3997 Lpm

3 to 999 gpm

1 to 3997 Lpm

AUXILIARY RELAY:
DISABLED

Example:

Auxiliary Relay is Disabled

Options:

 Enabled

Disabled 

(Default)

AUX RELAY OUTPUT
START 1 00:00:00

Example:

Auxiliary Relay Output Start 1 at 

0 hours, 0 minutes, & 0 seconds

Range:

  00:00:00 to 18:00:00

NOTE: Only displayed if Auxiliary Relay is enabled in previous screen. 

Auxiliary Relay will only display if Chemical Pump is OFF for System 

Types 6 & 7.

AUX RELAY OUTPUT
END 1 00:00:00

Example:

Auxiliary Relay Output End 1 at 

0 hours, 0 minutes, & 0 seconds

Range:

  00:00:00 to 18:00:00

CHEMICAL PUMP:

DISABLED

Example:

Chemical Pump is Disabled

Options:

 Enabled

Disabled 

(Default)

NOTE: This screen will only display on the lead unit for System Types 6 & 7. 

For all other System Types, it will display for all units.

CPO AUX RELAY
TIME:

00:00:00

Example:

Each time chemical pump relay is on, run for

30 seconds (00:00:30)

Range:

  00:00:00 to 02:00:00

FLOW METER:

1.0 PADDLE

Example:

1.0 Paddle Flow Meter

Options:

 1.0 Paddle

1.0 Turbine

1.5 Paddle

1.5 Turbine

2.0 Paddle

3.0 Paddle

Generic

NOTE: Default flow meter type is based on the valve type. This screen will 

only display on the lead unit for System Types 6 & 7. All other system types 

it will display for all units.

MAXIMUM FLOW
RATE:

0000 gpm

Example:

Maximum Flow Rate of 0 gpm

Range: 

20 - 2000 gpm (U.S. Format)

20 - 2000 Lpm (Metric Format)

 

NOTE: Only displayed if “Generic” is chosen for the flow meter.

Range: 

1 - 99 Gallons (U.S. Format)

0.1 - 09.9  L (Metric Format)

Pulses: 1 - 99

Options: 

Gallons (U.S. Format)

Liters (Metric Format)

ADD 01 GALLONS
EVERY 001 PULSES

Example:

Add 1 Gallon for Each Pulse in U.S. Format

NOTE: Only displayed if “Generic” is chosen for the flow meter.

PROGRAMMING UNIT
PLEASE WAIT...

Example:

Master Programming Mode is Exiting

CPO AUX RELAY
VOLUME:

000 9

Example:

Energize Chemical Pump relay every 50 gals (50)

Energize Chemical Pump relay every 200 L (200)

Range:

  1 to 999 gallons in U.S. Format

1 to 9999 L in Metric Format

NOTE: This screen will only display when cycle 4 is not OFF.

CYCLE 5 OFF

Example:

Off 

(Default 51-09 Stager)

NXT 

Stager 

Controller 

AU11

Summary of Contents for NX48



















Reviews: