
Fumes and gas exhaust hose reel
7
7.2 Inspection of goods
The MAXIREEL hose reel may be shipped on one (1) skid or attached in pairs. Proceed with a visual
inspection upon receiving the material for any damages or missing skid(s).
Note 1:
If damages are apparent upon receiving the material, indicate so on receiving slip (freight
waybill) and confirm by having the truck driver sign the waybill with any discrepancy. AQC takes
photos of material prior to shipping. Inspect hose reel appearance when receiving the goods.
Report damages to carrier immediately. Failure to do so will void future claims.
Note 2 :
Certain oversized tailpipe adaptors may be shipped not attached to flexible hoses. Minimal
assembly may be required at jobsite.
7.3 Location
1 .
The area where the hose reel will be installed should be able to sustain the weight of such
along with the accessories, ducting, fan or any optional equipment.
2.
Installer should ensure area around the hose reel will be free of obstacles such as beams,
lighting fixtures, overhead cranes, etc.
3 .
Height of installation for hose reel bracket should not be higher than the actual length of
flexible hose. If permitted, nozzle and hose should be hanging about 7' (2.2m) above the floor
in order for the user to grab the nozzle and pull on hose. If not permitted, a cable and handle
should be installed on the nozzle so user can grab handle to pull down flexible hose when
needed.
4 .
For safety measures, a minimum two (2) man crew should be appointed for the installation
of the hose reel.
WARNING!
Installation of equipment must be performed as per local
building laws and regulations. Structure must meet proper
weight support of arm and equipment. Installation must
be performed by a competent and qualified contractor.
Structural grade fasteners must be used for holding the hose
reel and components to ceiling, trusses or joyces.