Fumes and gas exhaust hose reel
10
9.4 Optional equipment
1.
Movement sensor with hose stop for automatic exhaust fan START/STOP.(requires reel
mounted control panel)
Note:
For proper operation, hose stop has to be aligned with movement sensor and reflector.
Contact AQC, fore more details on eletrical panel (refer to electrcial section of this manual).
2.
Mechanical spring damper at reel outlet. Usually required if hose is equipped with "open"
type nozzles.
3.
Low to extreme temperature hoses.
4 .
Different tailpipe adaptors.
5 .
Direct mount exhaust fan.
6 .
Lightweight aluminum cane nozzles for high truck stacks.
7 .
Telescopic pole with grab hook to reach fully coiled hose nozzle onto hose reel.
10 START UP (SPRING HOSE REEL)
Prior to using the hose reel for the first time, the check list must be followed to ensure a proper
continuous operation.
1 .
Pull down on tailpipe adaptor to uncoil the flexible hose from the hose reel drum.
2 .
Ensure you hear a clicking sound telling the operator the ratchet lock is moving over the
spring cassette gears.
Note: DO NOT COMPLETELY UNCOIL FLEXIBLE HOSE FROM HOSE REEL.
It is important to leave
half a loop of hose around the drum in order to coil it back on reel.
REFLECTOR
HOSE STOP
MOVEMENT
SENSOR