Fumes and gas exhaust hose reel
4
3 PRESENTATION
The MAXIREEL hose reel is designed to be installed near the source of fume or CO created by
vehicles while running and to be exhausted outside of the facility. A tailipe adaptor or hood at the
end of the flexible hose is required for proper source capture of contaminants.
The flexible hose can also reach inside of tanks, ship’s hulls or other confined areas where
conventional equipment cannot reach in order to facilitate the extraction of polluted air from
working areas.
Flexible hose mounted on the reel allows extraction of gas-air mixtures to a maximum 1500°F,
815°C (depending on the hose selected). Other special hoses may be supplied as per application.
3.1 Each spring hose reel unit includes:
•
Bolted reinforced steel frame
•
Flexible hose inlet connection
•
Exhaust outlet (to fan or main duct)
•
Galvanized hose storage drum and drum cover
•
Hose guide for proper flexible storage around the drum.
•
3 step paint preparation: degreasing, primer and polyurethane base paint final coat
•
Single or double heavy duty spring(s)
•
Spring cassettes
•
Hose type, diameter and length according to customer requirements
•
Tailpire adaptor according to customer requirements
•
Flexible hose stop
The MAXIREEL hose reel is delivered fully assembled. Spring tenssion is adjusted at the factory but
can be field modified if required.
3.2 Each motorized hose reel unit includes:
•
Bolted reinforced steel frame
•
Flexible hose inlet connection
•
Exhaust outlet (to fan or main duct)
•
Galvanized hose storage drum and drum cover
•
Hose guide for proper flexible storage around the drum.
•
3 step paint preparation: degreasing, primer and polyurethane base paint final coat
•
Tube motor (0.33 HP / 115V) direct drive
•
Handset, pendant or wall mounted UP/DOWN/STOP switch
•
Hose type, diameter and length according to customer requirements
•
Tailpire adaptor according to customer requirements
Note:
UP/DOWN/STOP limit switches are adjusted at the factory but can be field modified if
required.