Pivoting Extension Boom
6
5 OPERATION AND PURPOSE
During normal operation, the
MAXIREACH
swing boom is pulled or pushed into position for source
capture to vacuum dust or smoke laden air into the attached equipment such as the
MAXAIR
fume
arm. Particles are vacuumed into the equipment toward an exhaust fan and into a dust collector
or exhausted outside (when permitted).
6 NORMAL USE
The MAXIREACH
swing boom is designed to remove fumes, gases or dust from the air resulting
from a fabrication process. Each
MAXIREACH
swing boom is built as per the criteria and information
supplied by the customer for a specific application and should not serve any other application
without the approval of A.Q.C. Inc.
The MAXIREACH
swing boom is shipped partly assembled but requires minimal final field assembly.
Because of carrier restrictions, swing booms horizontal steel tubes longer than 10' (3 meters) are
shipped in two (2) pieces. A joiner with fasteners is included for field assembly.
The
Maxireach
swing boom is shipped partly
assembled but requires minimal final field
assembly. Because of carrier restrictions, swing
booms horizontal steel tubes longer than 10’
(3 meters) are shipped in two (2) pieces.
A joiner with fasteners is included for field
assembly.
METAL SLEEVE (SECURE WITH METAL
SCREWS AND DUCT TAPE OR SILICONE FOR
MINIMAL AIR LEAKS)
WELDED JOINER ON FIRST
HORIZONTAL BEAM
ALIGN BOLT HOLES ON SECOND
BEAM WITH HOLES ON JOINER
HORIZONTAL SUPPORT TUBES
JOINER WITH FASTENERS
