AQC MAXIFLO-VC, Owner'S Manual

Page: 8 / 29

AQC Dust Collecting Systems
Installation
Inspection of goods
The
Maxiflo-VC unit is shipped assembled or in
sections. Proceed with a visual inspection upon
receiving the material and check for any
apparent damage that may have occured on
freight. Generally, shipment includes the filter
cabinet and the dust storage section with
support structure. Other optional components
such as flame front exhaust duct or back draft
damper may be delivered on separate skids.
Location
1.
The area where the dust collector will be
installed should be able to sustain the
weight of such along with the
accessories, ducting, blower and matter
that will be stored. The construction of a
flat and solid surface such as a concrete
slab or platform may be required.
2. Wind factor and seismic zones should be
considered before selecting the location
of the dust collector.
3.
Position the dust collector in a way to
have access to the control panel, cleaning
valves, pneumatic conduits, access door
to filters and dust storage systems as
suggested in drawing # 2.
4. If the dust collector is equipped with an
explosion relief venting system, follow
guidelines for its location.
Recommended free/work space
Drawing # 2
36’’ min access
to cartridges
0’’ min
access to
valves
8