8
AQ Smart Speaker Status LEDs
The power button on the top of the AQ Smart Speaker has two built-in LEDs. These indicate
the power and network status of the AQ Smart Speaker.
The Power LED
The power LED is white, and will be on whenever the AQ Smart Speaker is switched on. The
Power LED will flash when the Speaker is on but the sound is muted.
The Wi-Fi LED
This LED is a colour LED which shows information about the Wi-Fi connection status.
LED Status
Description
Green
Connected to wireless network.
Red, flashing slowly
Not connected to network.
Signal strength may be too low or Speaker network
configuration may be wrong.
Red, flashing quickly Speaker is Starting Up.
If the Speaker persists in this state, see the
Troubleshooting section for more information
Red and green
flashing alternately
This shows the unit is in Network Configuration
mode. See the next page for details.
Orange
This confirms a reset action has been received and
will be performed, it will only appear briefly. See
the following sections for more details.
Orange, Flashing
slowly
There is a problem with the firmware. To resolve
the problem, reset the speaker, or perform a
firmware upgrade.
Off
If the Power LED is on, but the Wi-Fi LED is Off, The
Speaker is in Aux In mode. Briefly press the
Power/Mode button to switch between Airplay and
Aux In mode.
