21
generated by AQ
Smart Speaker
network.
•
Try temporarily switching off any other Wi-Fi devices,
except the wireless router which you plan to connect the
Speaker to.
•
Try restarting the computer.
•
Pressing the reset button on the Speaker will force it to
restart
Note: after doing this you will need to start from step one
of the connect procedure.
Configuration
page stops
responding or
disappears after
applying settings.
•
This is normal - the Speaker has accepted the settings and
is now restarting in order to connect to your wireless
network, but the computer is still connecting to the
Speaker configuration network. Close the browser
window and re-connect your computer to your normal
wireless network.
Wi-Fi LED does
not change from
red & green
flashing after
applying the
settings.
•
If the Wi-Fi LED does not change from red & green flashing
alternately, wait for 2 minutes to ensure that the settings
have been completely loaded, then press the reset button
on the back. The Speaker will restart and should connect
to the network.
Wi-Fi Light is
flashing red
slowly
•
The Speaker is not connected to the network. Either the
Speaker is not in range of the network or there is a
problem with the configuration settings.
•
If you have just applied the settings, you may need to
press the reset button on the back of the Speaker to finish
applying the new settings.
Wireless network
key is
automatically
filled in.
•
Your web browser may have stored this information from
setting up a previous device, if you are not absolutely sure
it is the correct key, delete it and type the correct key.
For further troubleshooting and technical support, please visit our website at
www.aqaudio.com
