14
Fig. 9
A Dialog Box will appear explaining the next step. If you are sure the network settings are
correct, Click OK to confirm this, the Speaker will then begin updating the settings.
Depending on your browser, you may also be asked if you want the password to be stored by
the browser – If you click yes, your browser will remember the wireless key you entered and
automatically fill in this box the next time you go to the setup page.
The AQ Smart Speaker will automatically disconnect and start to update its settings. Once
the Speaker has disconnected, the webpage will stop responding, so you can close the web
browser and reconnect the computer to your normal wireless network.
Step 6
The Wi-Fi LED will continue to flash red and green alternately until the settings have been
updated it will then flash red quickly for a while and then change to red slow flashing. Once
the Wi-Fi Led turns to green, the AQ Smart Speaker is connected to your network. If it does
not go to steady green after a minute, press the reset button on the back. The Speaker will
restart and should connect, if it still does not connect, check that your configuration was
correct.
