32
16.8
REAR FEELER WHEELS
In order to improve the guidance of the harrow along the ground, height-
adjustable feeler wheels can be used at the rear. The feeler wheels are
mounted on a crossbeam and can therefore be infinitely variably adjusted
to the track width.
Order number:
07014-2-384
Figure 44
16.9
CARBIDE TINES
A 60 mm-long carbide plate is soldered onto the wearing end of the tine,
which significantly reduces tine wear.
Order number:
07018-2-034: Carbide tine accessories kit for VS600
07019-2-012: Carbide tine accessories kit for VS750
07020-2-036: Carbide tine accessories kit for VS900
07014-2-299: Carbide tine accessories kit for VS1200
Figure 45
16.10
MANUAL TINE LIFTING
With the manual tine lifting, individual tines can be lifted (see Figure 46),
e.g. to avoid working in rows where the plants are already taller. As a result,
the harrow can be optimally adjusted for crops grown on beds.
Either the entire harrow can be equipped or any number of tine lifting
mechanisms can be selected. To actuate the tine lifting mechanism, lift the
tine and simply push the plate towards the tine.
Order number:
07018-2-047: Tine lifting accessories kit for VS600
07019-2-015: Tine lifting accessories kit for VS750
07020-2-049: Tine lifting accessories kit for VS900
07014-2-363: Tine lifting accessories kit for VS1200
07014-2-351: Individual tine lifting
Figure 46
Figure 47
16.11
LOWER LINK EXTENSION ACCESSORIES KIT
The lower link extension is attached to the lower links of the implement using
a pin and enables higher lifting of the implement on the headlands.
Please note: Use of the lower link extension increases the transport height
of the implement by up to 20 cm.
Order number:
07014-2-558
Figure 48
