10
6
MENU STRUCTURE
6.1
START MENU
This screen appears after the controller has started up. From here, the different menus can be called
up.
Figure 8
Description of the button functions:
In the Work menu, all of the important information for field operation is displayed. Here,
the motors can be switched on or off and information such as the forward speed, working
position, and seeding shaft speed is displayed. The Work menu is described in more
detail under Point 6.2.
The implement settings are entered in the Set menu. Here, a calibration test is performed,
the seed is selected or the forward speed is calibrated. The Set menu is described in
more detail under Point 6.3.
If the button is pressed and held for 5 seconds, the Basic settings menu is called up.
Here, basic settings can be entered (e.g. motor type or fan type). The Basic settings menu
is described in more detail under Point 5.2.
In the Info menu, the area and hour counters are displayed. The Info menu is described
in more detail under Point 6.4.
Summary of Contents for ISOBUS M2
Page 54: ...54 NOTES ...
Page 55: ...55 NOTES ...