14
6.3
SET MENU
Figure 10
Description of the button functions
Pre-metering menu: here, in addition to setting the pre-metering speed, you can also set
whether and for how long automatic pre-metering should be performed. The Pre-metering
menu is described in more detail under Point 6.3.5.
Task Controller menu: here, all settings for the Task Controller such as mounting the
implement, axle and seeding rail distances as well as switch-on/-off times can be entered.
The Task Controller menu is described in more detail under Point 6.3.6.
With the ESC button, you go back one menu level, in this case, to the Start menu.
Empty hopper menu: here, the hopper(s) can be emptied.
The Empty hopper menu is described in more detail under Point 6.3.7.
Seed library: here, a seed type already saved can be selected or a new seed type can
be created.
The seed library is described in more detail under Point 6.3.1.
Summary of Contents for ISOBUS M2
Page 54: ...54 NOTES ...
Page 55: ...55 NOTES ...
