ALTENERGY POWER SYSTEM, INC.
14
Step 5 - Connecting APS Micro-inverters to the PV Module
Photovoltaic panels and micro-inverter DC input cable connection according to demand.
The inverter YC250’s DC input positive pole connect to earthed enclosure inside the
enclosure.
The inverter YC500’s DC input negative pole connect to earthed enclosure inside the
enclosure.
WARNING:
Ensure that all AC and DC wiring is correct. Ensure that none of
the AC and DC wires are pinched or damaged. Ensure that all junction boxes
are properly closed.
NOTE:
Step 1~5 can change sequence for convenience of installation.
Step 6 - Completing the APS Installation Map
You need to fill-in APS Warranty Cards, which provide system information and installation
map. Feel free to provide your own layout if a larger or more intricate installation map is
required.
a. Each APS Micro-inverter has removable serial number labels. Peel a label off, and affix it
to the respective location on the APS installation map.
b. Fill the warranty cards and email to APS at [email protected]
c. APS will setup the EMA account and email you information, and then you can use the EMA
website to view detailed performance of your PV system.
Step 7 – Placing a Warning Notice
A warning notice shall be placed in such a position that any person gaining access to live
parts will be warned in advance of the need to isolate those live parts from all points of
