- 39 -
R
I n s t a l l a t i o n
4
English
•
Fit the stop inserts (3) supplied together with the
supporting brackets into the central guide of the rail.
Inserts have an obliged insertion direction.
•
Mark the position to drill the rail for the screw passage
on the threaded holes on inserts (3).
•
Remove inserts (3).
AP009050
3
3
AP009051
•
Drill ø 6 mm.
Ø
6
AP009033
4
5
3
5
3
•
Fit insert (4) (11 cm) for the control unit supporting
brackets into the central guide of the rail and inserts
(3) to anchor the supporting brackets at the ends.
•
Fit inserts (5) used to fix the geared motors into the
external guides.
•
Mount the geared motors and the electronic control
unit onto the rail - see par. 4.1.1 and 4.1.3.
Only for double-wing
•
The so completed rail must be laid on the supporting
brackets with geared motors oriented upwards and
fixed to the brackets with the 4 screws 5x12 to be
tightened to inserts (3).
•
Then complete the fixing operations as described in
par. 4.1.2.
AP009067
AP009068
OUTSIDE
INSIDE
OUTSIDE
INSIDE
