SC 230
CONNECTIONS
Description
19 24
18 -24
Accessory power supply 24 V DC
17 OPEN
It controls the opening if the gate is stopped.
If the gate is closing, it inverts the movement.
16 PED/C
L
It controls the pedestrian opening if the gate is closed.
It controls the closing if the gate is opened or stopped.
15 SEQ
It controls the opening if the gate is closed.
It controls the closing if the gate is stopped.
14 STOP
It controls the stopping of every movement and, if enabled, it prevents any movement.
13 PH1
Photocell 1 input: during closing, it inverts the movement and, if enabled, it prevents
closing.
12 PH2
Photocell 2 input: it stops any movement. If enabled it prevents any movement. When
disabled: opening.
11 SAF
Input for safety edge.
10 COM
Common inputs
9 +AUX
Remote
warning light of automation status:
• flashing fast during closing;
• flashing slow during opening;
• fixed light: swing gates NOT closed;
• light off: swing gates closed
M1
8 +TST
If dip 9 ON:
Safety devices Test Out
If dip 9 OFF:
LED flashing light Out
7 MCL
Motor Closing Winding
6 MOP
Motor Opening Winding
5 MCOM
Motor Common
4 L
Line 230 V AC
M2
3 N
Neutral 230 V AC
2 PE
Earth 230 V AC
M3
1 PE
Earth 230 V AC
20 GND
Radio Antenna Ground Connection
M4
21 ANT
Radio Antenna Pole
25 CLL
Closed gate limit switch
24 OPL
Open gate limit switch
23 -24
Common inputs
M5
22 24
Accessory power 24 V DC
CN1
Encoder connector
CN2
Additional module connector for second channel output
K3
Three-pin connector for accessories insertion; UNICO receiving radio board connection (alternative to
the integrated receiving unit) - Access control decoder.
Operating logic sequences
Dip Switch DSW1 Configuration
DIP1 DIP2
LOGIC
NOTES
ON
OFF
AUTOMATIC
Use OPEN input (Terminal 17)
OFF
ON
STEP - STEP
Use SEQ input (Terminal 15)
ON
ON
SUPER AUTOMATIC
Use SEQ input (Terminal 15)
ON
OFF
AUTOMATIC WITH STOP
Use SEQ input (Terminal 15)
OFF
OFF
STEP - STEP WITH STOP
Use SEQ input (Terminal 15)
12
