APRILIA DORSODURO 750 ABS 2015 Manual Download

Page: 64 / 146

Steering

Check that the rotation is uniform,
smooth and there are no signs of
clearance or slackness.

Side stand / Centre stand
OPTIONAL

Check it works properly. Check
that there is no resistance when the
side stand is pulled up and down
and that the spring tension makes
it snap back to its rest position.

Lubricate couplings and joints if
necessary.

Check the safety switch for correct
operation.

Clamping elements

Check that the clamping elements
are not loose.

Adjust or tighten them as required.

Drive chain

Check it for backlash.

Fuel tank

Check the coolant level and refill if
necessary.

Check the circuit for leaks or
obstructions.

Check that the tank cap closes
correctly.

Coolant

Fluid level inside the expansion
tank should be between the
'

FULL

' and '

LOW

' reference

marks.

Engine stop switch (ON - OFF)

Check function.

3 Use

Summary of Contents for DORSODURO 750 ABS 2015



















































































































































Search results

Summary of Contents for DORSODURO 750 ABS 2015

Reviews:

Related manuals for DORSODURO 750 ABS 2015

Brands by name

Popular brands

APRILIA DORSODURO 750 ABS 2015, Manual

Search results

Summary of Contents for DORSODURO 750 ABS 2015

Reviews:

Related manuals for DORSODURO 750 ABS 2015

Brands by name

Popular brands