APRILIA DORSODURO 750 ABS 2015 Manual Download

Page: 36 / 146

02_23

02_24

02_25

Mapping selection (02_23, 02_24, 02_25)

The engine control unit foresees 3 different "mapping" variants to manage the elec-
tronic throttle grip, which are displayed as seen in the upper left section of the
instrument panel digital display:

•

is the

TOURING

mapping

•

is the

SPORT

mapping

•

is the

RAIN

mapping

The

TOURING

mode has been thought for smooth tourist riding.

In the

SPORT

mode you get more acceleration; this variant has been thought for a

sporting use of the vehicle.

CAUTION

ONLY EXPERT RIDERS, RIDING ON ROADS WITH GOOD GRIP ARE ADVISED
TO USE THIS MODE. IT IS NOT RECOMMENDED FOR WET SURFACES AND/OR
ROADS WITH LOW GRIP.

2 Vehicle

Summary of Contents for DORSODURO 750 ABS 2015



















































































































































Search results

Summary of Contents for DORSODURO 750 ABS 2015

Reviews:

Related manuals for DORSODURO 750 ABS 2015

Brands by name

Popular brands

APRILIA DORSODURO 750 ABS 2015, Manual

Search results

Summary of Contents for DORSODURO 750 ABS 2015

Reviews:

Related manuals for DORSODURO 750 ABS 2015

Brands by name

Popular brands