4
EN
PREPARATIONS BEFORE USING
PREPARATIONS BEFORE USING
FEATURES
COMPONENTS
1.The cropped hair attachments are available for 1mm, 2mm, 3mm, 4mm, 5mm and
6mm cut The cutting length is indicated on the inside as well as on the side of the
cropped hair attachment. Install proper cropped hair attachment for the desired
cutting length. 2.Fit the cropped hair attachment protrusion into the mounting hole
of the head unit until the attachment is snapped on. 3.To remove the cropped hair
attachment, hold the comer of comb part and remove in the direction of the arrow.
Cutting length can be adjusted to 1mm, 2mm, 3mm, 4mm, 5mm and 6mm by using
the cropped hair attachments.
Please be sure to attach the protection head during recharging and after use to
protect the blade. Hold the center section and remove.
1.Turn switch to(OFF/CHARGE)and insert power feed plug into the unit socket
Charging can only be done at the (OFF/CHARGE)position. 2.Insert adaptor plug into
outlet. •During charging, the charge indicator lamp lights.
• Standard charging time is 8 hours.
• The unit can be operated for about 45 minutes on a full charge
• Do not use continuously for more than 20 minutes, To use for longer periods, stop
Turn on the switch.
To install the cropped hair attachments.
Cutting Operation
Procedure for Charging
Mounting hole
Protrusion
Lubricating
oil
Cleaning
Brush
Head
Body
Charge indicator lamp
Switch
