5
ATR-7005 User Manual
EN
Switch on the product and start gently removing your sideburns.
IMPORTANT: before attaching or removing accessories, you should switch the
product off.
In order to remove accessories, turn the head counter clockwise and take it out.
Then insert the new accessory and turn it clockwise.
SIDEBURNS CUTTING LENGTH
Thanks to the cutting guide supplied, it is possible to adjust the cutting length of the
sideburns.
In order to insert the guide simply hook to the head of the product.
BATTERY
In order to insert batteries (1x1.5V AA not included), just turn the product base
clockwise. Then insert batteries respecting the polarity. Close the compartment,
turning the product counter lock wise.
MAINTENANCE AND CARE OF THE PRODUCT
Before cleaning the product, switch it off. Remove the cutting head and clean it from
hair by the special brush. Then wash the head with water. Dry the head carefully
and then pour one or two drops of oil on blades. Never dip the product in water.
When the product is not used for a long period, it is recommended to remove
batteries, in order to avoid leakage that can damage the proper product
functioning.
Always store the product away from heating sources, sunlight, dampness and sharp
objects.
Clean the unit with a damp cloth and never use detergents or abrasive liquids.
WARNING:
never allow water to come into the product. When you clean the head,
please point the blade downwards. Only after the unit has dried completely, should
the trimmer switch on again.
The batteries used in this device must be disposed of in the special bins at the end
of their life.
