24
25
UNDERSTANDING PROGRAM SCHEDULES
PROGRAM SCHEDULE AND HOLDS
The daily schedule is split into four sections:
WAKE:
Temperature you would prefer to wake up to .
LEAVE:
Temperature when you are away from the house .
RETURN:
Temperature you would prefer to return home to .
SLEEP:
Temperature you would prefer while sleeping .
The times shown in the table below are the defaults . The start time and temperature of each section can be changed
to fit your schedule . (See Changing Program Schedules section on pages 26-27 .)
This Home Comfort Control is pre-set to use the following program settings (see table below) . We recommend these
settings, since they can reduce your heating/cooling expenses . The fan program is pre-set to AUTO for all events .
Event designator
Start time
Setpoint
Fan
Heat
Cool
WAKE
6:00AM
70°F (21°C)
78°F (25 .5°C)
AUTO
LEAVE
8:00AM
62°F (16 .5°C)
85°F (29 .5°C)
AUTO
RETURN
5:00PM
70°F (21°C)
78°F (25 .5°C)
AUTO
SLEEP
10:00PM
62°F (16 .5°C)
82°F (27 .5°C)
AUTO
Event designator
Start time
Setpoint
Fan
Heat
Cool
WAKE
LEAVE
RETURN
SLEEP
UNDERSTANDING PROGRAM SCHEDULES
(CONTINUED)
PROGRAM SCHEDULE AND HOLDS
Use the table below to assist in modifying the schedule .
PROGRESSIVE RECOVERY
The Progressive Recovery feature allows the Home Comfort Control to activate the heating and cooling equipment
PRIOR
to a scheduled event in order to reach the desired temperature at the start of that scheduled event .
Example:
If the WAKE time is 6 am, and the Heat Setpoint is 70°F, the heat will come on before 6 am, so the
temperature is 70°F by the time you wake at 6 am .