www.apricorn.com
PARTS NAMES AND FUNCTIONS
Your EZ Writer may differ slightly from the fi gure shown, however the
controls will operate as described below.
Front Panel of the Drive:
1. Disc
Ready/Read
LED:
This LED is used to indicate the disc access status.
2. Eject
Button:
Press this button to open the disc tray. To close the disc tray, gently
push the front of the try.
3. Emergency
Eject:
In case you cannot supply power to the drive but want to remove a disk
from the tray, push a small rod(paperclip) about 5cm long, through the
Emergency Eject hole to disengage the gears inside. Then pull the tray
out manually. After removing the disk, gently push the tray back to its
original position. This procedure is only to be used in the case of an
emergency and is not meant for normal operation.
NOTE: Front panel may look slightly different depending upon which optical
drive is included with you EZ Writer.
4