www.apricorn.com
SOFTWARE INSTALLATION FOR WINDOWS 2000
1. Boot up your computer into Windows 2000, making sure the USB device
driver has been installed and is available. To check this, right-click ‘My
Computer’, click ‘Properties’ then ‘Hardware’ and then ‘Device Manager’
window. Refer to the fi gures shown below to see if the USB Controller
is correctly installed.
2. Connect the USB interface cable and the AC adapter as described in
Hardware Installation. Insert the port connector of the USB interface
cable into the USB port of your computer. The LED on the drive should
light.
Port connector of the USB Cable
USB Port of computer
The above fi gure indicates that
the drivers have been installed
into a system that supports both
USB 1.1 and USB 2.0.
The above fi gure indicates that
the drivers have been installed
into a system that supports both
USB 1.1 and USB 2.0.
12
