Apreto Networks PacketMAX 5000, Installation And Operaion Manual

Page: 79 / 150

4–5
PacketMax 5000 Installation and Operation Manual, 10007678 Rev J
Chapter 4. Installing the Base Station ODU Radio and Antenna
Figure 4-2 Grounding lug on 3.3 and 3.5 GHz radio attached to base bracket
NOTE: The “UP” sign in the BSR ( Figure 4-2 ) indicates proper vertical orientation
that would allow moisture to escape the unit.
Step 2. Mount Base Station Radio
A. Unscrew the Warm Gear Clamps. Slip it in the Arm Bracket holes.
B. Wrap it around the pole and screw it tightly.
C. Insert M5 screws through the bracket to the unit. Tighten the screws.
D. Attach Arm Bracket to the Base Support. Insert M8x40 mm screw (no washer
required on this end) from one end of the bracket and insert M8 Flat Washer, M8
Lock Washer and M8 Hex nut in the respective order from the other end. Tighten
the Hex nut.
The unit is now mounted on the pole.
Figure 4-3
A, B,C shows the process.
Grounding lug
12 or 10 Gauge
grounding wire