24
indicators on both devices illuminate steadily. If the connection fails, the Power
indicators on both devices keep steady on, but the Data indicators on both devices
are off. In that case, repeat steps 1-4.
6.2 Joining a Network
Scenario:
Devices A and B are located in network N. Users want to add device C (the joiner)
into network N. Any devices on network N can become the „adder‟.
Figure 17 Join a HomePlugAV network
Do as follows to add device C to network N using the
Reset\Security
button:
Step 8
Press the
Reset\Security
pushbutton on device C (the joiner) for about
5-8 seconds. The device will reset and restart with a random NMK.
Step 9
Press the
Reset\Security
button on device C (the „joiner‟) for less than 3
seconds.
Step 10
Within 30 seconds, press the
Reset\Security
button on device A (or
device B) for less than 3 seconds.
Step 11
Wait for connection to complete.
The power indicator on both devices will flash evenly at 1 second intervals until the
operation succeeds or fails. If the connection succeeds, the Power and Data
indicators on both devices illuminate steadily. If the connection fails, the Power
