Appro LC-7233 Installation & Operation Manual Download Page 6

Page: 6 / 106

1. PRODUCT FEATURES

1.1 Product Instructions

This is a 3-axis IP dome camera with a vandal-proof body for day and night surveillance. With the

specific 3-axis mechanical design, this dome camera provides a flexible installation for ceiling or

wall mounting and wide angled viewing which pans 360

and tilts 180

The IP dome camera provides a dual video stream in the MJPEG and MPEG4 formats with up to

30 fps for real-time images. The built-in Web server supports remote monitoring and control via

local area network or the Internet. With the built-in IR lights, this camera captures vivid imaging

for nighttime condition. In addition, the IP dome camera supports PoE function, built-in motion

detection, and alarm notification by SD card (SDHC, up to 32GB) and one alarm output.

We also provides a free bundle recording software for video management. This is a feature-packed

IP dome camera for indoor surveillance, which enables you to meet your security demands.

1.2 Product Features

Selectable MJPEG / MPEG4 video compression.

1/3” Sony Super HAD CCD.

Horizontal resolution: 520 TV lines.

Built-in motion detection.

IR distance: 20M.

Built-in Web server.

Pre-alarm: 100 pictures.

Supports upgrading by SD card / USB / FTP.

Free bundle recording software.

SD Card Support: MMC/SD/SDHC 2.0 32MB~32GB

Summary of Contents for LC-7233











































































































Search results

Summary of Contents for LC-7233

Reviews:

Related manuals for LC-7233

Brands by name

Popular brands

Appro LC-7233, Installation & Operation Manual

Search results

Summary of Contents for LC-7233

Reviews:

Related manuals for LC-7233

Brands by name

Popular brands