Appro LANCAM LC-7214P Installation & Operation Manual Download Page 11

Page: 11 / 86

2.3 Flank Panel

-- Right Flank Panel --

-- Left Flank Panel --

ALC

IRIS

POWER

LAN

1 AES
2 DC IRIS
3 DHCP
4 STATIC IP

RESET

DC CONT DRIVE

3 5

SD CARD

1. Lens

Mount:

This LAN CAMERA is used with either a C or a CS mount lens.

2. IRIS:

Auto iris connector.

This camera works with a DC drive auto iris lens. Please refer to the pin assignment

marked on the camera when connecting the auto iris lens.

3. ALC

VR:

Iris control VR.

When an auto iris (DC Drive) lens is used, this VR is used to adjust the iris for different lighting

environments. Adjust the VR clock-wise to open the iris and counter-clockwise to close the

iris of the camera.

4. DIP

Switch:

1. AES:

Auto electric shutter.

2. DC IRIS:

Use an auto iris (DC drive)

3. DHCP:

Turn On / Turn Off to use the DHCP protocol. If the switch
points upwards, the device can change the setup of
network function (enable/disable) via the network.

4. STATIC IP:

If the switch points down, the device can’t obtain an IP

address from the DHCP server. This option is needed
to configure the network communication settings.

5. RESET:

Recover to factory default.

6. POWER

Indicator:

Indicates the power status of the unit. The green light indicates the

unit is activating. The red light indicates the power is on and the SD card cannot be

removed.

7. LAN

Indicator:

Indicates the LAN status of the unit. The green light indicates the 100

Mbps Ethernet network is activating. The red light signals the LAN is data linking.

SD CARD Slot:

This is used for system software updating and archiving / accessing

critical images.

Summary of Contents for LANCAM LC-7214P























































































Search results

Summary of Contents for LANCAM LC-7214P

Reviews:

Related manuals for LANCAM LC-7214P

Brands by name

Popular brands

Appro LANCAM LC-7214P, Installation & Operation Manual

Search results

Summary of Contents for LANCAM LC-7214P

Reviews:

Related manuals for LANCAM LC-7214P

Brands by name

Popular brands