6
console shows current position, navigation information, or other unit status in real time as the
dive is conducted.
With this unit, the diver can control the functionality of NavDive, including saving the lat/long
of the entry point, navigating to any pre-loaded target site while underwater, saving the
lat/long of any notable site while underwater, or automatically storing (tracing) the entire dive's
lat/long coordinates.
Basic Overview of the Diver Console
Liquid Crystal Display (LCD)
The LCD contains 4 lines of 20 characters, organized to show operational status as well as menu
options that can allow the diver to select the proper modes of operation.
In this user’s guide, we will represent the information on the LCD via this type of graphic:
Main Menu
> 1 Pre Dive
2 Start Dive
3 Post Dive
Momentary contact switch controls
NavDive contains 4 switch controls that are accessible by the diver. They are:
System Power – this switch turns the power on to the diver console as well as the GPS receiver.
It is located on the front edge of the unit (as shown below):
Summary of Contents for NavDive
Page 1: ...1 Diver Navigation System User s Guide ...
Page 8: ...8 User interface controls Up Down Left Right and ENTER ...
Page 19: ...19 ...
Page 26: ...26 ...