MiniPod Receiver Operation Manual
RFR-101G-8000/1
__________________________________________________________________________________________________________
___________________________________________________________________________________________________________
Page
9
of
18
If not all the Mini
Pods connect press the ‘Network Joining’ button to allow other
MiniPods
to join the network, this will allow 60 seconds for any remaining MiniPods to Join the
Network’.
Once all required MiniPods have been connected, the Pod List will show the data
received from each pod, however the Model Number and Serial Number data for each
MiniPod will be blank (as shown below).
To get the Model Number and Serial Number of each connected MiniPod, sele
ct ‘Get
ID’s’ from the Tools menu.
Please note you may have to repeat the Get ID’s process
more than once to get data from all connected pods.
When this process is complete the Pod List should look similar to that shown below
If all MiniPods have not connected after 3 attempts please check MiniPod Settings via RS232
and ensure RF communication is enabled.
Refer to
‘
MiniPod GPS Receiver Operation Manual
’
[BCN-101G-8002]
Summary of Contents for 101G
Page 1: ...MiniPod Receiver Operation Manual ...
Page 18: ......
