MiniPod Receiver Operation Manual
RFR-101G-8000/1
__________________________________________________________________________________________________________
___________________________________________________________________________________________________________
Page
14
of
18
System Message Area
The system will display various informational warning and errors messages in this area.
Menu
File
The pod configuration for the currently connected pods can be saved to a file. The
saved settings include ID, ID On, Diff. On and Output Port.
This saved file can then be recalled for future operations.
Receiver
The serial port that the receiver is connected to can be selected. However, the correct
receiver serial port should be automatically selected on start up.
Tools
•
Get ID will call all the identification details from the connected mini pods and
populate the Pod list.
•
Clear Error counts will reset the error details located in the pod list.
•
Configure Network will set the relevant delays for the Mini-Pods that are
connected.
•
Extended info toggles the extra pod list column on/off
•
Options will take you into the program options menu as explained on the
following page.
Help
About will bring up the following menu which shows the current software version of the
application followed by the serial number of the RFR-101G and Network Port that it is
broadcasting across (if enabled). The link at the bottom will take you to the Modulus
Technology website where contact details for help and support can be found.
File
Open
Save
Save As
Receiver
Com 1
…
Com N
Tools
Get ID’s
Clear Error Counts
Configure Network
Extended Info
Options
Help
About
Summary of Contents for 101G
Page 1: ...MiniPod Receiver Operation Manual ...
Page 18: ......